If you have a fireplace, you will know of its advantages. It keeps the house warm, even if it is freezing outside. But it can be tough to maintain a fireplace. If you want to use it during the harsh winters, then you would have to take care of it all through the year. It will not cost you a lot of money or time to maintain your wood burning fireplace the right way. Follow these tips to keep your wood-burning fireplace –

 

1. Get a Heat Proof Blower and Glass Doors

 

Installing a glass door is adding a safety measure to your house but more importantly it keeps children away from the fireplace. It will contain embers and other burning material inside the fireplace only. The fan will help circulate the heat to every corner of the place.

 

2. Clean Interior of The Fireplace

 

The best way of maintaining anything is to keep it clean. The same goes for a wood-burning fireplace. Dust, ashes embers, and other burning material will get accumulated in the fireplace. This is why you need to clean the interior of the fireplace correctly and with proper equipment.

 

3. Choose the Right Wood to Burn

 

The wood you burn can have an impact on the fireplace, which is why you need to burn the right wood in the fireplace. You can choose hardwood to burn. Woods of trees like birch and oak can burn longer and make your house hotter.

 

4. Check the Cap of the Chimney

 

You will have a cap to cover the top side of the chimney, which will prevent any unwanted items from falling. Make sure you keep the cap on when you are not using the chimney. But when your chimney is in use, make sure you have removed the cap.

 

5. Examine Your Chimney

 

Make sure that there is no crack in the mortar lying of the masonry chimney. When you are using a metallic chimney, make sure that there is no rusting, dents or dust in the chimney. Any of the above can cause you a hazardous problem, for you and your family. An annual inspection of the chimney is always recommended.

Proper maintenance of your chimney can assure it a long life. if you want to get any chimney related service you can choose Housemartin, they are the best stove installers in Surrey. You can rely on them as they provide excellent service.

You might find handling a wood-burning stove concerning but still is excited about it. You might not get the perfect fire the first time, even after the stove installers in Surrey get the initial process started for you. It will only be possible with practice.

Here are a few measures to keep in mind to safely handle a wood-burning stove for the first time.

 

Things to Know Before Lighting the Stove for the First Time

 

It is important to remember that a new stove takes time to burn-in. As a result, it might give out unpleasant odour for the first time you burn it. These might be from the chemical residues, but the smell will be gone within 6 hours. Make sure to remember massive and slow-burning fire can cause pollution. Instead, the more efficient process is using smaller and hotter burning fires.

Things Required for Lighting the Stove

Make sure to have things you require for lighting the stove for the first time. You can either use a newspaper or firelighters. Other items include kindling wood, lighter or matches, poker, protective gloves and tongs and solid fuel.

The Process of Lighting the Stove  

These are the following steps to keep in mind to handle lighting the stove for the first time.

• You are preparing the stove: While preparing the stove to scatter some ashes at the bottom of your stove to ensure that woods are burning best. Since the furnace is being lighted for the first time, it is sure to be clean. Make sure all air vents are open when you are conducting the process. The chimney damper should always be available to stop any form of suffocation inside the room.
• Build your fire: Make sure to place the newspapers of firelighters at the bottom of the stove. Here are the few techniques you can employ:

1. Kindling wood should be on the top of the paper.
2. From the below light the paper.
3. Make sure to leave the stove for a while and wait for the fire catching process to complete.
4. You can add a few more logs and wait for the fire to get started.

• Adjusting Air Vents: To keep the fire under control close the bottom air vent slowly. Please do not close the other vent as it helps to continue to feed the flames.

Now that you have got your fire started to make sure it is under control. You can also use other techniques to build your fire as long as they are safe.

Housemartin is a reliable and trusted company for stove installers in Surrey. They are experienced and ensure high-standard installations. They provide you with specialists knowledge at a very affordable price rate.